1 - lighting and signaling in switch position 0, 1 or 2,
2 - change the intensity of illumination of the instrument cluster
Light signaling
Pull the switch lever towards you.
Direction indicators
To signal the intention to change motion to the right or left, move the switch lever up or down (in a plane parallel to the steering wheel). To signal the intention of crossing or changing lanes, do not move the switch all the way, overcoming resistance. At the end of the maneuver, release the pressure on the switch lever.
Sound signal
Press the end of the light switch.
Changing the illumination intensity of the instrument cluster
To adjust the illumination of the instrument cluster, use the knob located under the steering wheel on the steering column.
3 - position 0: lighting off; when the engine is started, the dimming dipped beam is automatically switched on.
4 - position 1: front and rear marker lights (control lamp on the instrument cluster); turn the switch a quarter of a turn forward.
5 - position 2: dipped and high beam headlights (indicator lights on the instrument cluster). Turn the switch all the way. In this position, pull the switch handle in the direction of the steering wheel against resistance. This turns on the high beam (and the control lamp on the instrument cluster lights up). To turn on the dipped beam headlights again, pull the switch handle in the direction of the steering wheel.