Air filter (Magneti Marelli fuel injection system)
Injector fixing screws on Monopoint Bosch system
The nozzle mounting screws are marked with arrows.
Removing
1. Remove the earth wire from the battery and the air filter.
2. Disconnect the wires from the throttle position potentiometer, injector and throttle motor.
3. Remove fuel and return hoses (indicated by arrows for later model).
4. Remove the accelerator cable.
5. Unscrew the screws securing the injector to the intake manifold and remove it together with the gasket.
Installation
Installation in place is carried out in the reverse order of removal, while taking into account:
- contact surfaces must be dry and clean. Be sure to install a new gasket;
- correctly connect all hoses and connectors.