Removing
1. Open the trunk lid and disconnect the negative terminal from the battery.
2. Remove the caps and trunk lid trim.
Trunk lock
3. unscrew the bolts (photo on the left), disconnect the linkage (photo on the right) and remove the trunk lock.
Trunk lock cylinder
4. Unscrew the screws securing the lock cylinder housing and remove the trim and gasket from the outside of the trunk lid.
5. Disconnect the rods and remove the lock cylinder housing from the trunk lid.
6. Remove the trunk lock bracket.
7. Separate the lock button together with the body, marking the location of the springs (indicated by arrows).
8. Remove the trunk lock cylinder.
Installation
Installation is carried out in the reverse order of removal. Before installing the trunk trim, check the operation of the lock.