2. Open the rear door, unscrew the screws and remove the inner door handle.
3. Using a screwdriver, remove the decorative cover of the inner button.
4. Remove the rear door trim mounting pins.
5. Remove the rear door interior trim.
Lock
 |
 |
6. Unscrew the lock mounting screws (photo on the left), remove the rods from the lock and remove the lock from the rear door (photo on the right).
Rear door lock cylinder
7. Disconnect the bracket and separate the rod from the lock.
 |
 |
8. Disconnect the electrical connector from the central door locking motor (photo on the left), unscrew the bolts and remove the lock from the rear door (photo on the right).
Internal lock button
9. Remove the rear door lock. Note that the lock is connected to the button by a rod, which must be disconnected from the lock and removed from the rear door.
10. Release the mounting brackets and remove the rear door lock button.
11. Installation is carried out in the reverse order of removal.