Loudspeakers installed in the door
1. Disconnect the negative cable from the battery.
2. Remove the loudspeaker grille by prying it from below with a thin screwdriver or by unscrewing the three screws.
3. unscrew the screws (indicated by arrows) fasteners, remove the loudspeaker from the door and disconnect the electrical connector.
4. Installation is made in sequence, return to removal.
Panel Mounted Speakers (on models up to 1992)
1. Disconnect the negative cable from the battery.
2. Remove the speaker grille from the top of the panel.
3. unscrew the screws (indicated by arrows) fasteners, remove the loudspeaker and disconnect the electrical connector.
4. Installation is made in sequence, return to removal.
Loudspeakers installed on the panel (models since 1993)
1. Disconnect the negative cable from the battery.
2. Using a thin screwdriver, remove the loudspeaker from the panel and disconnect the electrical connector. The loudspeaker and the grille are one piece.
3. Installation is made in sequence, return to removal.
Speakers mounted on the rear panel (sedan models)
1. Disconnect the negative cable from the battery.
2. Working in the luggage compartment (on the back of the shelf), disconnect the wiring from the loudspeaker.
3. Release the plastic fastening brackets and remove the loudspeaker through the shelf into the car interior.
4. Installation is made in sequence, return to removal.