Rear view mirror with manual adjustment
1. Remove the rubber protective boot from the mirror adjustment knob and remove the interior mirror trim from the door.
2. Using a screwdriver, remove the plugs from the doors. Unscrew the screws and remove the mirror from the door.
Rear view mirror with electric drive
3. Remove the mirror trim from the inside of the door.
4. Remove the plugs with a screwdriver (indicated by arrows in the photo on the left) from the inside of the door, unscrew the screws (indicated by arrows in the photo on the right) fasteners and remove the mirror from the door.
5. Disconnect the electrical connectors from the mirror.
Mirror glass
Attention! The mirror glass is fixed in the mirror holder with a conical connection. When removing the mirror glass, it is very easy to break it, so this work must be done with gloves.
6. Tilt the mirror all the way up and insert a wide plastic or wooden plate between the glass and the mirror holder. Remove the bottom of the mirror from the holder.
7. Remove the mirror glass and disconnect the electrical connector (indicated by an arrow) mirror heating.
Mirror position control motor
8. Remove the mirror glass.
9. Loosen the fixing screws (indicated by arrows), remove the engine and disconnect the electrical connector from it.
10. Installation is made in sequence, return to removal.