2. Move knob B in four directions to adjust the position of the selected mirror.
3. Return switch A to its original center position.
Attention. Keep in mind that objects seen in the driver's and passenger's rear-view mirrors appear more distant than they actually are.
Take this into account to correctly estimate the distance to vehicles moving behind.
Folding mirrors
- From the outside: lock the car with the remote control or key, the mirrors will fold in automatically.
- From the passenger compartment: switch on the ignition and pull handle A back.
Note. If the mirrors have been folded out of the passenger compartment, they will not return to their working position when the vehicle is unlocked. To do this, pull the handle A again.
The function of folding and unfolding the mirrors to the working position using the remote control can be disabled by contacting the service network «PEUGEOT».
Automatic mirror tilt when reversing
1. Start the engine and engage reverse gear.
2. Select and adjust, respectively, the position of the left and right mirrors. This setting is memorized immediately.
3. Move switch A to the left or right to select the appropriate mirror. The selected mirror will be tilted.
4. Disengage reverse gear or move switch A to the left to its original center position. The mirror will take its initial position.
It will also return to the initial position: if the car is moving at a speed above 15 km/h or if the engine is turned off.