Rear headrests
To remove the headrest, pull it forward and up until it stops, press the lock A.
Folding the seat (sedan)
To fold the seat without breaking it, always start with the cushion, not the back.
If necessary, move the corresponding module forward, lift the front part of cushion 1, fold cushion 1 towards the front backrest, check whether the seat belt is correctly positioned on the side of the backrest.
To increase the capacity of the luggage compartment, cushion 1 can be removed and stowed.
To release the fasteners, you need to squeeze them.
Pull up on lever 2 to remove backrest 3 from the locks, lower the headrests or, if necessary, remove them, lower backrest 3.
Installing the seat in place (sedan)
When installing the rear seat back into place: lift the backrest 3 and lock it, lower the cushion 1.
Seat folding (SW)
Folding is done from the rear seats or the tailgate. To fold the seat without breaking it: if necessary, move the front seat in front of it, lower the headrests to the lowest position.
Pull forward on handle 1 to release backrest 2 from the lock, which easily fits onto seat 3.
Installing the seat in place (SW)
When installing the rear seat back into place, first lift the backrest 3 and lock it.
Make sure that the red indicator located near handle 1 is not visible.