Table of contents: Manual seat adjustment 🠇 Electric seat adjustment 🠇 Memorizing the positions of the seat…🠇 Setting the seat and mirrors to the…🠇 Installation 🠇
Manual seat adjustment
1. Adjusting the longitudinal position
2. Adjusting the seat cushion tilt
3. Seat height adjustment
4. Adjusting the seat backrest tilt
5. Adjusting the lumbar support
Electric seat adjustment
A. Adjusting the longitudinal position
B. Adjusting the seat cushion tilt
C. Seat height adjustment
D. Adjusting the seat backrest angle
1, 2, M. Memory device buttons
The memory device allows you to save 2 options for seat and outside rearview mirror settings.
Memorizing the positions of the seat and rearview mirrors
1. Turn the ignition key to position A.
2. Adjust the positions of the seat and rearview mirrors.
3. Press buttons M and 1 simultaneously to memorize the first option or buttons M and 2 to memorize the second option of adjustments.
Setting the seat and mirrors to the position fixed by the memory device
4. Door open and ignition off: Pressing button 1 or 2 once automatically sets the seat and then the rear-view mirrors to the first or second setting option, respectively. Pressing the button briefly sets the rear-view mirrors. Holding the button down sets the mirrors and then the seat.
5. Once the automatic adjustment of the seat and mirrors is complete, a short beep sounds.
Installation
1. Remove the rear shelf.
Article republished from the website peugeotbook.ru
2. Fold down the luggage compartment floor A using the handle on the floor panel. Grasp the headrest and lift the backrest of the third seat B.
3. Pull up firmly on the third seat back while keeping the seat cushion raised up.
4. Lower the seat cushion and make sure it is locked into place.