Table of contents: Right crankshaft seal 🠇 Left crankshaft seal 🠇
Right crankshaft seal
1. Remove the crankshaft pulley and timing belt. Measure the seal installation depth.
2. Drill two small holes in the seal, located at diametrically opposite ends of the seal. Screw two self-tapping screws into the drilled holes of the seal and, using pliers, pull the seal ring out by the screw heads.
3. Clean the seal seat.
4. Lubricate the working edges of the new sealing ring with clean engine oil and install it on the crankshaft. The working edges of the new sealing ring should be directed inward.
Original published on the portal peugeotbook
5. Using a suitable drift, press the O-ring into the seat to a depth equal to the installation depth of the old O-ring.
6. Remove all traces of engine oil and install the crankshaft pulley.
Left crankshaft seal
7. Remove the flywheel. Measure the depth of the sealing ring in the seat.
8. Drill two small holes in the seal, located at diametrically opposite ends of the seal. Screw two self-tapping screws into the drilled holes of the seal and, using pliers, pull the seal ring out by the screw heads.
9. Clean the seal seat.
10. Lubricate the working edges of the new sealing ring with clean engine oil and install it on the crankshaft. The working edges of the new sealing ring should be directed inward.
11. Using a suitable drift, press the sealing ring into the seat to a depth equal to the installation depth of the old sealing ring.
12. Remove all traces of engine oil and install the flywheel.