Location points for axle stands
When using a hydraulic jack or axle stands, always position the jack head or axle stand head under one of the relevant jacking points.
To raise the front of the vehicle, position the jack with an interposed block of wood underneath the suspension lower arm mounting bracket (see illustration). Do not jack the vehicle under the sump, or any of the steering or suspension components.
When raising the front of the vehicle, locate the jack underneath the suspension lower arm mounting bracket (1)
To raise the rear of the vehicle, remove the spare wheel then position the jack head underneath the rear crossmember (see illustration). Do not attempt to raise the vehicle with the jack positioned underneath the spare wheel, as the vehicle floor will almost certainly be damaged.
When raising the rear of the vehicle, remove the spare wheel and position the jack head underneath the rear crossmember (2)
The jack supplied with the vehicle locates in the jacking points in the ridge on the underside of the sill. Ensure that the jack head is correctly engaged before attempting to raise the vehicle.
Never work under, around, or near a raised vehicle, unless it is adequately supported in at least two places.