Removing
1. Remove the negative terminal from the battery.
2. Remove the steering wheel.
3. Using a thin screwdriver, remove the plug from the side of the instrument panel on the driver's side.
4. Unscrew 3 screws (indicated by arrows) fixing the upper part of the decorative lining of the instrument cluster.
5. Remove the instrument cluster trim (photo on the left) and extract it (photo on the right).
6. Unscrew 4 screws (indicated by arrows) instrument cluster mountings.
7. Insert a screwdriver between the top of the instrument cluster and the instrument panel and pry the instrument cluster out of its socket.
8. Disconnect the 2 electrical connectors from the rear of the instrument cluster and remove the instrument cluster from the dashboard.
Installation
1. Connect the electrical connectors to the instrument cluster, install it in the dashboard and secure with screws.
2. Install the instrument cluster trim on the instrument panel and secure with screws.
3. Connect the accumulator and check up operability of a combination of devices.