2. Disconnect the plug 3. Unscrew the bolt 4, then carefully turn the speedometer sensor 2 (see arrow A in the illustration), to loosen its fit.
5.2 Disconnect plug 3, unscrew bolt 4, then carefully turn speedometer sensor 2 (see arrow A), to loosen its grip
3. Remove speedometer sensor 2 together with shaft 1 (see illustration). Proceed carefully to prevent the shaft from falling out of the sensor housing
5.3 Remove speedometer sensor 2 together with shaft 1
The speedometer sensor is installed in the reverse order of removal, taking into account the following:
[Original published on the portal: PeugeotBook.ru]
4. Apply a small amount of petroleum jelly to area B of the sensor to lubricate the sensor shaft (see illustration).
5.4 Apply a small amount of petroleum jelly to area B of the sensor to lubricate the sensor shaft