2. Remove the battery and its tray, as well as its mounting bracket.
3. Disconnect plug 1 (see illustration).
4.3 Disconnect plug 1
4. Drain gear oil.
5. Release hose 2 from holder 3 (see illustration).
4.5 Release hose 2 from holder 3
6. Remove protective cover 4 to gain access to the modulator (see illustration 4.5).
7. Remove retaining ring 5 (see illustration)
4.7 Remove retaining ring 5
8. First loosen the tightening, and then unscrew the bolts 6 fastening the modulator (see illustration).
4.8 First, loosen the tightening, and then unscrew the bolts 6 fastening the modulator
9. Remove the speedometer sensor 7 (see illustration 4.8).
10. Disconnect plug 8 of the input speed sensor (primary) shaft (see illustration).
4.10 Disconnect plug 8 of the input speed sensor (primary) shaft
11. Remove modulator 9 (see illustrations 4.10 and 4.0).
4.0 Modulator
A - plug of the output rotation speed sensor (secondary) shaft
B - regulator
C - solenoid valve MV1
D - regulator
E - input speed sensor (primary) shaft
F - transmission oil temperature sensor
G - regulator
H - solenoid valve MV2.
I - regulator
Attention. All regulators are identical and interchangeable, as are both solenoid valves. Regulators are identified by black ring marks. Solenoid valves - yellow labels.
12. Disconnect the output shaft speed sensor plug (see illustration).
4.12 Disconnect the output shaft speed sensor plug