13. The tightening torque of the output shaft speed sensor is 10 Nm.
14. Make sure the rod is properly seated in the selector (see illustration).
4.14 Make sure the rod is properly seated in the selector
15. Tighten the modulator mounting bolts in a spiral pattern to 8 Nm.
16. Before installing the new protective cover, make sure that the magnetic holders are present and correctly positioned 10 (see illustration).
4.16 Before installing a new protective cover, make sure that the magnetic holders are present and correctly positioned 10
17. Check the transmission oil level.
(Source of the article is posted at: «Peugeotbook.ru»)