Cancelling and resuming cruise control, resetting the set speed value (Peugeot Partner I)

To temporarily turn off the system, press the button on the end of the handle or press the brake or clutch pedal. In these cases, the set speed values are not erased from the system memory. If the system has been turned off in this way, you must press this key again to resume its operation.

The system's operation can be temporarily suspended, for example, to perform an overtaking maneuver. To do this, simply press the accelerator pedal to reach the desired speed. After releasing the accelerator pedal, the system will resume operation and the speed will gradually and automatically drop to the set value.

In addition, the system is disabled when the stability control system or the anti-skid system is activated.

Resetting the set speed value

You can reset the programmed speed value by:

• ignition off;
• moving the rotary switch on the handle plane to the OFF position