Table of contents: Removal 🠇 Installation 🠇
Rear light
1 – license plate light holder, 2 – rear light, 3 – lampshade, 5 – holder
Removal
1. Open the trunk.
2. Unscrew the two intermediate and two side fastening elements.
3. Remove the rear light mounting bracket.
4. Disconnect the electrical wires from the flashlight.
5. Remove the rear light.
Installation
1. Perform the steps in reverse order to the removal process.
Source available here: PeugeotBook
2. Check the operation of the rear light.
3. If a bad connection is found, the area should be cleaned with sandpaper.