Attention! The brake pressure control valve is located on the right side of the rear axle assembly. On some models with rear drum brakes, the valves are combined with the working brake cylinders.
Attention! Do not attempt to remove the pressure control valve on models equipped with Bendix brakes with ABS. This work must be carried out at a service station.
Attention! When installed in its original place, the valve must be adjusted using special equipment.
Removal and installation
1. Raise the rear of the car and secure it on stands.
2. Disconnect the valve actuator spring from the suspension.
3. Unscrew the union nuts and disconnect the brake pipes from the valve.
4. Unscrew the valve mounting bolts and remove the valve from under the car.
5. Installation is carried out in the reverse order of removal.
6. Bleed the brake system and have the valve adjusted at a workshop.