Attention! On models with brakes such as Bendix with ABS, the hydraulic modulator must be removed.
Removing
1. Remove the vacuum brake booster.
2. Remove the mounting bracket and remove the pin with a head and a hole for the cotter pin that secures the brake pedal pusher with a vacuum booster.
3. Unscrew the pivot bolt nut and remove the brake pedal from the vehicle.
Installation
1. Lubricate the gasket with multipurpose grease and insert it into the pedal pivot hole.
2. Reinstall the brake pedal. At the same time, check that the pusher is in its place.
3. Insert pivot bolt and secure with nut.
4. Align the pedal with the pusher and insert the pin with the head and the hole for the cotter pin and secure it with brackets.
5. Further installation is carried out in the reverse order of removal.