Removal
1. Remove the suspension coil spring.
2. Remove the inner pivot bolt and remove the lower control arm from the vehicle.
Repair
Replacing the inner bushing of the lower arm requires the use of a hydraulic press and special mandrels, so it should be done at a service station.
1. Completely clean the lower arm and the area around the arm mount from dirt and anti-corrosion coating.
2. Check the lever for cracks, deformation or other signs of wear.
[Material copied from the resource: peugeotbook]
Installation
1. Lubricate the pivot bolts and nut contact areas with Molykote G Rapide Plus lubricant.
2. Place the lower control arm in place and insert the inner pivot bolt.
3. Install the rear suspension coil spring.