16. Remove the clutch cover.
17. Lock the flywheel with stop "a", catalog number of which is 0153-ZX (see illustration). Lock the crankshaft by installing a suitable thrust pin in the appropriate hole.
5.17 Lock the flywheel with stop "a", catalog number of which is 0153-ZX
18. Unscrew bolt 3 and remove crankshaft gear 4 (see illustration). Remove the front crankshaft oil seal.
5.18 Unscrew bolt 3 and remove crankshaft gear 4
19. Fit a new front crankshaft oil seal 5 with a suitable mandrel, for example mandrel "a", part number 0187-G, pressing the mandrel with bolt 3 (see illustration).
5.19 Fit a new front crankshaft oil seal 5 with a suitable mandrel, for example mandrel "a", part number 0187-G, pressing the mandrel with bolt 3
20. Next, the installation of the dismantled components is carried out in the reverse order of removal.
21. Tighten bolt 3 of the crankshaft gear with a torque of 40 Nm, then turn the bolt by 80°.
(Original published on the portal: www.PeugeotBook.ru)