- remove the air conditioning unit;
Pic. 10.120. Removing the air conditioner: 1, 4 - clamps for fastening the wiring harness; 2 - electrical connectors; 3 - bracket mounting screw
- disconnect electrical connectors 2 (pic. 10.120);
- unscrew the screw 3 fastening the bracket;
- release the air conditioner wiring harness from clamps 1 and 4;
Pic. 10.121. The location of the flanges of the air conditioner housings: 1 - screws; 2 - clamps; 3 - cover
- remove screws 1 (pic. 10.121) cover fastenings 3;
- remove cover 3;
- remove all fasteners 2 connecting the flanges of the air conditioner housings;
- cut the foam composition along the parting line of the air conditioner housings;
- separate the flanges of the air conditioner housings from each other;
Pic. 10.122. Removing the evaporator from the air conditioning unit
- tilt the evaporator and remove it from the air conditioning unit (pic. 10.122).
Installation is carried out in the reverse order of removal, taking into account the following:
- before compressing the flanges of the air conditioner housings, align them correctly;
- install the air conditioning unit.