- turn off the ignition and disconnect the ground wire from the battery;
- remove the car radio;
Figure 10.108. Location of the cabin air temperature sensor with the sensor support (1) and the direction of its removal (A)
- release support 1 from the retainer (figure 10.108) the cabin air temperature sensor and remove it together with the support by sliding it forward;
Figure 10.109. Location of air temperature sensor elements: 1 - electrical connector; 2 - cabin air temperature sensor; 3 - sensor support
- disconnect the electrical connector 1 from the air temperature sensor (figure 10.109) and remove the sensor together with the support.
Installation is carried out in the reverse order of removal, taking into account the following:
- connect the ground wire to the battery;
- check the operation of electrical equipment;
- initiate all electronic systems.