Car rear suspension Peugeot 307

General information and design of the rear suspension
The rear suspension beam consists of two longitudinal arms and a reinforcement, welded together. The rear beam is attached to the body via a bracket with rubber-metal bushings. For shock absorption, two shock absorbers...

Rear suspension specifications
Tables 6.4, 6.5, 6.6, 6.7 show the main technical characteristics of the rear suspension.

Replacing the rear suspension beam
To remove the rear suspension beam: lift and secure the vehicle, leaving the rear wheels off the ground; Caution! Do not lift the vehicle using the center of the rear suspension beam as support. remove the rear wheels;...

Replacing the rear suspension spring
To remove the rear suspension spring: lift and secure the vehicle, leaving the rear wheels off the ground; Figure 6.32. Using the hydraulic strut (1) to compress the spring before unscrewing the nut and bolt (2) of the...

Replacing the rear shock absorber
To remove the rear shock absorber: lift and secure the vehicle, leaving the rear wheels off the ground; Figure 6.32. Using the hydraulic strut (1) to compress the spring before unscrewing the nut and bolt (2) of the...

Replacing the front hinge of the rear suspension beam
To remove the front hinge of the rear suspension beam: remove the rear suspension beam from the car; unscrew the nut and remove the bolt securing the support bracket to the rear suspension beam; Figure 6.34. Position of...

Replacing the rear wheel hub
To remove the rear wheel hub: lift and secure the vehicle, leaving the rear wheels off the ground; remove the rear wheels; remove the brake pads and brake disc; unscrew the bolts and remove the rear brake cover; unscrew...

Replacing the hub assembly with the bearing and axle
To remove the hub assembly: lift and secure the vehicle, leaving the rear wheels off the ground; remove the rear wheels; Figure 6.40. Location of rear brake components: 1 - calipers; 2 - brake disc; 3 - protective cap...

Adjusting the rear suspension of a car
To adjust the rear suspension of the car: Figure 6.44. Brackets for fastening belts when measuring the middle position of the rear suspension to measure the center position of the rear suspension, make the brackets...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

See similar information for other Peugeot models

➨ Chassis, running gear: Rear suspension Peugeot 206 (1998-2012)
➨ Chassis, running gear: Rear suspension Peugeot 405 (1987-1997)

Link to this section in different formats

TEXTHTMLBB Code