- turn off the ignition and disconnect the wire «masses» from the storage battery;
- remove the lower part of the central panel;
Pic. 10.105. Screw location (1) panel fixings (2) climate control and clamps (A)
- unscrew four screws 1 (pic. 10.105) fastening of the panel 2 of management of the climatic installation;
- release from the clamps at points A (see fig. 10.105) air conditioning control panel and tilt it away from the instrument panel;
- For vehicles with air conditioning, do the following:
Pic. 10.106. Location of air conditioner elements: 1, 4, 5 - electrical connectors; 2 - clamps; 3 - control cables
- disconnect electrical connectors 1, 4, 5 (pic. 10.106);
- remove clamps 2;
- Disconnect control cables 3.
- On vehicles with automatic air conditioning, do the following:
Pic. 10.107. Location of electrical connectors (1, 2, 3) on vehicles with automatic air conditioning
- disconnect electrical connectors 1, 2, 3 (pic. 10.107);
- remove the air conditioner front panel.
Installation is carried out in the reverse order of removal, taking into account the following:
- connect wire «masses» to the battery;
- check the operation of electrical equipment;
- initiate all electronic systems.