Table of contents: Bosch injection system, Purflux…🠇 Roto Diesel Injection System 🠇
Roto Diesel injection system with filter and heater Roto Diesel
1 – injection pipes, 2 – return pipes, 3 – housing, 4 – water drain bolt, 5 – water level sensor, 6 – filter element, 7 – filter head, 8 – manual fuel pump, 9 – heater, 10 – return pipe, 11 – fuel supply pipe
Roto Diesel Fuel Filter
1 – water drain bolt, 2 – hand pump, 3 – deaerator
Removal the injector body
1 – fireproof gasket (with the convex surface facing up)
2 – copper gasket
Bosch injection system, Purflux filter
Information copied from the resource Peugeotbook.ru
1. Open the deaerator (1) (see picture Purflux Fuel Filter).
2. Press the button (3) until the fuel starts to flow out without air bubbles.
3. Screw in the deaerator (1).
4. Press the button (3) until you feel a noticeable resistance.
5. Turn on the starter for 10-15 seconds (for automatic deaeration of the injection pump).
Roto Diesel Injection System
6. Open the deaerator (3) (see picture Roto Diesel Fuel Filter).
7. Press the button (2) until the fuel starts to flow out without air bubbles.
8. Screw in the deaerator (3).
9. Turn on the starter for 10-15 seconds (for automatic removal of air from the high-pressure fuel pump).