Table of contents: Removal 🠇 Installation 🠇
Removal
Engines 1.9 liters
1. Remove the auxiliary drive belt.
2. Align the mounting holes in the camshaft pulley, fuel pump pulley and flywheel and secure them with bolts and rods.
3. Loosen the timing belt tensioner pivot point nut and adjusting bolt, then turn the tensioner hanger counterclockwise to release the belt tension and retighten the adjusting bolt.
4. Remove the two bolts securing the guide roller support to the cylinder block, keeping in mind that the top bolt also secures the suspension.
5. Loosen the four mounting bolts, keeping in mind that the top bolt is on the inside of the front plate. Remove the guide roller.
2.1 liter engines
6. Remove the timing belt.
7. Unscrew the central bolt securing the guide roller and remove it from the engine.
Installation
Installation is carried out in the reverse order of removal.