Attention! When working on the fuel system, you must first remove the pressure in the system.
Removing
1. All fuel must be drained before removing the fuel tank. Disconnect the electrical connector from the fuel pump as well as the fuel hoses.
2. Raise the rear of the car and secure it on stands.
3. Remove the exhaust system and heat shield.
4. Remove the filler pipe from the right side of the fuel tank (A) and breather (IN) (C - vapor removal pipe).
5. Remove the supply and return hoses on the right side and plug them with plugs.
6. Remove the hand brake cable from its mountings and move it to the side.
7. Support the fuel tank with a jack and unscrew its fastening (indicated by an arrow).
8. Slowly lower the fuel tank and remove it from under the vehicle.
Installation
Installation is made in sequence, return to removal. At the same time, it is necessary to check that none of the hoses is pinched when installing the fuel tank.