Table of contents: Removal 🠇 Installation 🠇
Removal
1. Carefully remove the multifunction display frame from the front panel (figure 10.1).
Figure 10.1 Carefully remove the MFD bezel from the front panel
2. Remove the two screws and remove the unit from the front panel. Disconnect the electrical connector and remove the unit from the vehicle (figure 10.2, a, b).
Figure 10.2, a. Remove two screws (marked with arrows)...
Figure 10.2, b....then remove the multifunction display and disconnect the electrical connector
Installation
3. Installation is performed in the reverse order of removal.