Table of contents: General 🠇 Torque wrench settings — Nm/lbf·ft 🠇
General
Lubrication (overhaul only) — Use only special grease supplied in sachets with gaiter kits - joints are otherwise pre-packed with grease and sealed
Torque wrench settings — Nm/lbf·ft
Driveshaft intermediate bearing bracket securing bolts — 45/33
Driveshaft intermediate bearing securing nuts — 10/7
Driveshaft nut* — 245/181
Front anti-roll bar drop link securing nuts* — 30/22
Front anti-roll bar end clamp-to-lower arm bolts — 25/18
Lower arm balljoint-to-hub carrier nut and clamp bolt* — 50/37
*Use a new nut.