Table of contents: Exhaust intake pipe 🠇 Intermediate exhaust pipe and muffler 🠇 Rear exhaust pipe and muffler 🠇 Heat shields 🠇
The exhaust system is multi-sectional. The exhaust pipe is bolted with an internal sealing ring. The catalytic converter is located in the front part of the exhaust system.
The exhaust system is suspended from the body on rubber cushions.
Each section of the exhaust system can be removed separately or after removing the entire exhaust system.
Exhaust intake pipe
1. To remove the exhaust system, place the vehicle over an inspection pit or lift it on a lift.
2. Unscrew the fasteners (indicated by arrows) exhaust inlet pipe to the manifold.
3. Unscrew the fasteners of the exhaust inlet pipe to the intermediate exhaust pipe. Remove the exhaust inlet pipe together with the O-rings from under the car.
Intermediate exhaust pipe and muffler
1. To remove the exhaust system, place the vehicle over an inspection pit or lift it on a lift.
(Information posted on the website: «PeugeotBook»)
2. Remove the clamping ring bolts and disconnect the intermediate pipe from the exhaust manifold and the rear exhaust pipe. Some vehicles may have a ground busbar that attaches to the clamping ring bolt.
3. Disconnect the intermediate pipe from the rubber mounts and remove it from under the vehicle.
Rear exhaust pipe and muffler
1. To remove the exhaust system, place the vehicle over an inspection pit or lift it on a lift.
2. Loosen the clamping ring mounting bolt and disconnect the rear exhaust pipe from the intermediate pipe.
3. Disconnect the rear exhaust pipe from the rubber suspension mounts and remove it from under the vehicle.
Heat shields
The heat shields are attached to the body and can be removed after removing the corresponding section of the exhaust system.