Table of contents: Removal 🠇 Installation 🠇
Removal
Door speakers
1. Rotate the speaker grille a quarter turn counterclockwise and remove it from the door trim panel.
2. Remove the four screws and remove the speaker from the panel. Disconnect the electrical connector and remove the speaker (figure 18.2, a, b).
Figure 18.2, a. Remove the four screws (marked with arrows) and remove the speaker from the door panel
Figure 18.2, b. Disconnect the electrical connector and remove the speaker
Rear speakers
3. Remove the four screws securing the speaker housing (figure 18.3).
Figure 18.3. Remove the four screws securing the speaker housing
4. Remove the housing and disconnect the speaker electrical connector. Remove the two screws and remove the speaker from the housing (figure 18.4, a, b).
Figure 18.4, a. Disconnect the electrical connector...
Figure 18.4, b....then unscrew the two screws (marked with arrows) and remove the speaker from the case
High-frequency speakers installed on the front panel
5. Remove the tweeter from its location on the top of the front panel, disconnect the electrical connector and remove the speaker.
Installation
6. Installation is carried out in the reverse order of removal.