Table of contents: 1.4 litre models 🠇 1.5 litre models 🠇
1.4 litre models
1. Slacken the retaining clip and disconnect the breather hose from the left-hand end of the air cleaner cover (see illustration).
19.1. Slacken the retaining clip and disconnect the breather hose from the air cleaner cover
2. Slacken and remove the three retaining screws from the front of the air cleaner housing cover. Work around the cover, undoing all its quick-release fasteners, then lift off the cover, noting the four sealing rings (see illustrations).
19.2a. Air cleaner cover retaining screws (A) and quick-release fasteners (B)
19.2b. Lift off the cover...
3. Lift out the filter element, noting which way around it is fitted. Inspect the cover sealing rings for signs of damage or deterioration, and renew as necessary (see illustrations).
19.3a.... and withdraw the element
19.3b. Check the air cleaner cover O-rings for signs of damage, and renew if necessary
4. Fit the new filter element, ensuring that it is correctly seated in the inlet manifold.
5. Ensure each sealing ring is correctly seated in its recess in the cover, then refit the cover to the manifold.
6. Secure the cover in position with its quick release fasteners, then refit the three retaining screws and tighten them securely.
1.5 litre models
7. Slacken the clips and detach the connecting tube and air intake duct from the air cleaner housing cover.
8. Slacken and withdraw the retaining screws, then remove the cover from the air cleaner housing and withdraw the filter element, noting its orientation.
9. Remove all traces of dirt and debris from the inside of the air cleaner housing, using a cloth.
10. Fit the new element, ensuring that it is fitted the correct way round and is correctly seated in the housing.
11. Install the cover and secure it in position with the retaining screws. Refit the connecting tube and air intake ducts and tighten the retaining clips securely.
(Original can be viewed at: «Peugeotbook.ru»)