3.0b Location of the air filter for XU engines with 8 valves. The replaceable filter element is removed after removing the cover.
1 - coolant expansion tank cap
2 - air filter cover
1 - coolant expansion tank cap
2 - air filter cover
3.0v Location of the air filter for engines with 16 valves. The replaceable filter element is removed after removing the cover.
1 - air intake hose
2 - air filter cover
1 - air intake hose
2 - air filter cover
31. Disconnect the low pressure hose and air hoses on the end side of the air filter housing. Cut the hose clamps, and when installing the hoses, use new clamps.
32. Remove the inlet pipe on top of the air filter housing.
33. Wring out the clamping springs that hold the air filter cover to the housing.
34. Remove the o-ring. The sealing ring must be replaced if its condition requires it.
35. Remove the air filter element. If the filter element is not very clogged or dirty, it can be blown out with compressed air. Blow out the filter element from the inside to the outside.
36. Wipe the inside of the air filter housing with a rag and install a new replacement filter element. Make sure he sits well.
All other work is performed in the reverse order of removal.