1.6 liter models
1. Disconnect the fastening clamps and remove the inlet pipe from the front of the cylinder head cover.
2. Unscrew two screws (indicated by arrows) fasteners on the front of the head cover.
3. Disconnect the two filter cover brackets.
4. Remove the filter cover (photo on the left) and remove the filter element (photo on the right).
5. Install a new filter element and follow all the steps in reverse order with respect to removal.
1.8 and 2.0 liter models
1. Disconnect the bracket (indicated by arrows) and remove the inlet fitting tube from the air filter housing cover.
2. unscrew the screws (indicated by arrows), securing the cover to the air filter housing and remove the cover.
3. Remove the filter element and clean the air filter housing and cover.
4. Install the new air filter element and previously removed elements.