Table of contents: Removal 🠇 Refitting 🠇
Removal
1. Undo the retaining nuts and remove the undercover panel from the driver's side of the facia.
2. Depress the retaining clips and detach the inner cable from the top of the accelerator pedal.
3. Slacken and remove the two nuts securing the pedal mounting bracket to the bulkhead. Slide off the outer part of the mounting clamp, then withdraw the pedal from behind the facia and slide off the inner part of the clamp.
4. Examine the mounting bracket and pedal pivot points for signs of wear and renew as necessary.
Source can be seen at peugeotbook
Refitting
5. Refitting is a reversal of the removal procedure, applying a little multi-purpose grease to the pedal pivot point. On completion, adjust the accelerator cable as described in Section 7.