Removing
On vehicles equipped with a knee airbag, remove it.
On vehicles without a knee airbag, remove the cover (1).
Remove the clips (2) and headset (3).
Loosen the fixing screw (4) and release the lid (5).
Remove the brake light switch.
Release the wire harness clips (in the zone «A»), move the wiring harness.
Disconnect connector (clutch switch, in zone «b»).
Disconnect drive (7) from the clutch pedal.
Remove the ring (8) and retainer (9).
Remove the shaft (10).
Fold and slide the steering column (11).
Disconnect connector (in the zone «With»).
Loosen the nuts (12) and remove the pedal assembly (13).
Installation
Install the parts in reverse order.