- pull the hood release lever;
Pic. 11.12. Hood lock: 1 - interior decoration; 2 - bolt; 3 - lever
- remove interior trim 1 (pic. 11.12);
- unscrew bolt 2;
- move the lever 3 to open the hood;
- release the upper protective grille of the radiator lining from the clamps;
Pic. 11.13. Disconnecting the hood release cable: 1 - lock; 2 - rope
- release the cable 2 from the clamp (pic. 11.13), connected to lock 1;
Pic. 11.14. Rope attachment: 1 - rope
- wind the plug with the hole for the cable on the cable itself 1 (pic. 11.14);
- remove the cable from the passenger compartment by pulling on it.
Install the hood opening cable in the following order:
- put a plug with a hole for the cable on the new cable;
- lubricate the element for threading the shell with soapy water;
- pull the plug with a hole for the cable;
- run the cable along the wing;
- remove the plug with a hole;
Pic. 11.15. Installing the hood release cable: 1 - clamp
- pull the tip to pull the sheath using clip 1 (pic. 11.15);
- connect cable 2 (see fig. 11.13) to castle 1;
- complete installation in the reverse order of removal, while tightening bolt 2 (see fig. 11.12) torque 6 Nm.