- put the car on a lift;
Pic. 11.5. Removing the deflector: 1 - clamps; 2 - deflector
- remove clips 1 (pic. 11.5);
- remove deflector 2;
Pic. 11.6. Drilling holes in the deflector
- mark the places for drilling holes in accordance with fig. 11.6 in 8 mm from the edge of the deflector, with a distance between holes of 120 mm;
- drill holes in the deflector with a diameter of 4.2 mm;
- install the deflector on the bumper and mark the drilling locations in the bumper using a core;
- drill holes in the bumper with a diameter of 5 mm;
- fasten the deflector to the bumper using rivets 6973.44, starting from the central axis of the vehicle;
- lower the lift.