Table of contents: Models before 1993 🠇 Models since 1993 🠇
Instrument cluster
1 – glass casing, 2 – indicator board, 3 – tachometer (or clock), 4 – speedometer, 5 – housing, 6 – drive cable
Models before 1993
1. Disconnect the negative cable from the battery.
2. Move the steering wheel to the lowest position.
3. Remove the instrument cluster cover screw covers from both sides of the switches.
4. Unscrew the screws.
5. Remove the instrument cluster cover.
6. Disconnect the electrical connectors connected to the instrument cluster.
7. Unscrew the screws securing the instrument cluster panel.
8. Remove the headlight range control knob.
9. Unscrew the screws (indicated by arrows) instrument cluster casing.
10. Remove the instrument cluster cover.
11. Unscrew the screws (indicated by an arrow) instrument clusters.
12. Tilt the instrument cluster slightly and disconnect the speedometer drive cable.
13. Remove the instrument cluster.
14. To install the instrument cluster, perform the steps in reverse order to the process of removing it.
Models since 1993
1. Disconnect the negative cable from the battery.
2. Press out the mounting brackets and the lower part of the instrument cluster casing.
3. Remove the lower part of the instrument cluster.
4. Loosen the lower steering column mounting bolts.
5. Unscrew the two upper steering column mounting bolts, disconnect all connectors and remove the steering column.
6. Remove two screws from the bottom and one screw from the top of the instrument cluster mount.
7. In the engine compartment, remove the speedometer drive cable.
8. Insert a soft plastic or wooden pry bar between the upper cover and the instrument cluster, push the instrument cluster down and turn it toward you.
9. Disconnect the wires from the back of the instrument cluster.
10. Remove the instrument cluster.
11. To install the instrument cluster, perform the steps in reverse order to the process of removing it.