Table of contents: Right seal 🠇 Left seal 🠇
Right seal
1. Remove the pulley from the crankshaft.
2. Drill two holes in the seal on two diametrically opposite sides and screw self-tapping screws into them. Pull the seal out using pliers by the screw heads.
3. Clean the seal seat thoroughly.
4. Lubricate the working lips of the new seal with engine oil and, using a suitable tubular mandrel, install the seal into the seat.
5. Install the pulley onto the crankshaft.
Left seal
6. Replacing the left seal is done in the same way as replacing the right one, except that the flywheel must first be removed.