- turn off the ignition;
- wait 3 minutes before disconnecting the battery;
- disconnect the battery.
Remove the front wheels and mudguards.
Left side
Disconnect the connector (in area "a").
Loosen the screws (2) and remove the front fog light (1).
Right side
Loosen the screw (3).
Remove the windscreen washer reservoir (4) from its support (towards the rear of the vehicle, in the direction of arrow "b").
Disconnect the connector (in area "c").
Loosen the screws (6) and remove the front fog light (5).
Installation
Install the parts in reverse order.
Check the functionality of electrical equipment.
Adjust the front fog lights (in case of replacement).
Adjustment
Place the vehicle on a level, horizontal surface.
Set the wheels straight.
Check the air pressure in your tires (if necessary, bring up to the standard specified by the manufacturer).
The vehicle must be in running order: a vehicle without passengers or cargo, fully filled with fuel and operating fluids.
Start the engine.
Align the headlight adjustment ruler with the vehicle in accordance with the Facom device user manual (see description for adjusting regular headlights).
Rotate the round knob (7) using a spanner.
Continue the control procedure by following the instructions for the device you are using.