2. There is special equipment for dynamic checking of injection advance, but it is unlikely that it is available to an amateur mechanic. This equipment works by converting pressure pulses in the injector line into electrical signals. If this equipment is available, use it in accordance with the manufacturer's instructions,
3. The static advance adjustment described in this chapter will give good results if done correctly. You will need a dial indicator and appropriate dipsticks and adapters, depending on the type of high pressure fuel pump (pic. 6.3). Before you begin, review the entire procedure to find out what is required of you.
Pic. 6.3. TDC setting tools and blocking tools for injection advance setting