Removing
Remove the front bumper (see section «Body»).
Drain the liquid refrigerant from the air conditioner circuit.
Disconnect the refrigerant lines from the condenser (see corresponding operation).
Remove the top fasteners (3) and remove the air conditioner condenser.
Installation
Attention. When removing the air conditioning pipes, the bearing surface «A» clamp must be pressed against the plane «IN» capacitor before tightening the nut.
Attention. Observe the required tightening torques.
Note. In the case of replacing the air conditioner condenser, when charging liquid refrigerant using unit 1, add 20 cm3 oils for the air conditioner compressor.
Create a vacuum in the air conditioner system (for at least 15 minutes).
Check the tightness of the system. Install the parts in reverse order.
Create a vacuum in the air conditioner system (for at least 35 minutes).
Charge the air conditioning circuit with refrigerant.
Check the functioning of the air conditioner.