Removing
Special fixture:
1 - FACOM U35P puller.
Disconnect the battery.
Remove the air conditioning compressor.
Install the A/C compressor in a vise in the area «A».
Attention. Install the guard on the vise jaws.
Remove:
- air conditioning compressor drive pulley;
- retaining ring (1);
- shims (2).
Install the tool [1] and use it to remove the pulley (3).
Remove retaining rings (4).
Attention. Mark the position of the induction coil (5) in relation to the air conditioning compressor.
Slide induction coil (5) air conditioner compressor.
Release the electrical connector «b» from its fastening.
Remove the induction coil (5).
Installation
Install the electrical connector «b» into the mount.
Install the telecoil (5).
Note. Check the alignment of the ledge «d» and nests «With».
Install retaining ring (4) (check the correct installation of the retaining ring (4) into his groove).
Install A/C Compressor Pulley (3).
Install the A/C compressor pulley until it stops (3) using a mandrel.
Install:
- retaining ring (1) (check the correct installation of the retaining ring (1) into his groove);
- shims (2);
- A/C compressor drive pulley.
Install the air conditioning compressor.
Connect the battery.