Attention. After turning off the ignition, wait 15 minutes before disconnecting the battery to ensure that the trip computer and ECU settings are remembered.
Disconnect the battery.
Remove the air deflector (4) and air resonator (5).
Remove the bolt (2) and remove the air intake connector (3).
Disconnect the oil level and temperature sensor connector in the area «A».
Remove the sensor (2), using the key (nozzle 22 mm) with a long handle.
Attention. When removing, use a rag to protect the equipment from oil escaping from the hole.
Install the oil level and temperature sensor.
Connect the connector in the zone «A».
Connect the battery.