Attention. On the BE4/5 gearbox, the shift cable is not adjustable. The gear selector cable can be adjusted.
Gearbox control drive
1 - gear shift tip: diameter 10 mm.
2 - shift control cable.
3 - gear lever.
4 - cable control gear selection.
5 - gear selection tip: diameter 10 mm.
Gear selection and shift cables
Length between braid stoppers:
- shift control cable - A = 643±2 mm;
- gear selection control cable - B = 670±2 mm.
Note. The shift cable has a black marking on the sheath support in «A».
Unlocking the shell stopper:
- using a small flathead screwdriver, press the tabs on the latch (6) in the zone «b»;
- remove the shell stoppers from their supports by pulling upwards.