Adjustment device:
1 - tool for removing retainers of ball bearings with a diameter of 10 mm 0216-G1;
2 - device for locking the lever in the neutral position 0216-M.
Remove the air filter (if necessary).
Unfasten one or more adjustable gearshift ball joints from the gearbox (depending on equipment variant) with tool 1.
Remove the center console (see corresponding operation).
Set the gearshift lever to neutral.
Insert tool 2 as far as it will go and turn it ¼ turn as shown by the arrow.
Push the shift lever against tool 2.
Unlock the adjustment mechanism by pulling the spring according to the distance (A) and pressing the button (IN).
Lock one or more ball joints (depending on the installed equipment), resting in the zone (IN).
Lock by releasing the pusher (IN).
Note. Check that the ball joints are properly installed and locked.
Check gear shift. Reinstall the center console and air filter.