Pic. 8.17. Electrical connector location (1) brake light switch
- disconnect electrical connector 1 (pic. 8.17) from the stoplight switch;
Note. The brake light switch is located on the brake pedal bracket.
- use a screwdriver blade as a lever to remove the brake light switch from the pedal assembly.
To install the brake light switch:
- press the brake pedal with your hand and install the brake light switch into the socket;
- gently release the brake pedal to the end, while the brake light switch should follow the pedal, and thus it will be adjusted;
- connect the electrical connector to the brake light switch;
- check the operation of the brake lights. The brake lights should come on after the brake pedal is depressed approximately 5 mm.