Water pump − Mounted on the cylinder block. The drive is carried out by a toothed belt from the crankshaft.
Radiator - Installed on the cylinder block. The drive is carried out by a toothed belt from the crankshaft.
Opening pressure of the outlet valve on the tank cap − Indicated on the cap (1.4 bar)
Radiator Fan − Electric (two can be installed). Located behind the radiator and activated by a thermal switch
Thermostat − Element filled with wax. Installed in the body of the stat
- opening temperature - about 88°C, all engines
- fully open - at a temperature of about 100-102°C, all engines
- thermostat pin travel at specified temperature − 7.5 mm
Coolant temperature sensor - Screwed into the thermostat housing and wired to the indicator light on the instrument panel. The control lamp lights up at a high temperature of a cooling liquid (overheating). Contact closing temperature 118°С.
Refueling volume
- 1.8 liter petrol engine - approx. 8.0 liters
- 2.0 liter petrol engine - approx. 8.5 liters
- diesel engines - approx. 9.0 l
Coolant - According to manufacturer's recommendations, e.g. Procor 3000
Coolant change − Every two years